Lighting Accessories
Everything you would need to pull install our lights.
"~ 2.5"" Round Closed Back Short Depth"
"~ 2.5"" Round Standard Closed Back"
"2"" Round Standard Open Backed"
"2.5"" Round Recessed 3"" Hole"
"2.5"" Round Standard Open Backed"
"4"" Round Standard Open Backed"
"Bottom Leads 2-Wire (Bare) Fits Both 2"" & 2.5"" Led & Incandescent Markers"
"Side Leads 2-Wire (1 Bare / 1 Terminal) Fits Both 2"" & 2.5"" Led & Incandescent Markers"
120mm Projection Headlight Mounting Bracket – Original Style Replacement
Restore a secure, factory-style headlight installation with this 120mm Projection Headlight Mounting Bracket. Designed as an original-style replacement, the bracket provides the mounting support needed for compatible 120mm projection headlight assemblies. Ideal for replacement, repair, restoration, and OEM-style installations on compatible RVs, trucks, buses, commercial vehicles, and specialty applications.
120mm Projection Headlight Mounting Bracket – Special Design, 12-Gauge
Get dependable mounting support for compatible 120mm projection headlights with this Special-Design 12-Gauge Headlight Mounting Bracket. Built from heavy-duty 12-gauge material, this bracket provides a robust mounting solution for applications requiring a specialized alternative to standard headlight brackets. Ideal for compatible RVs, motorhomes, trucks, buses, commercial vehicles, and specialty vehicle applications.
18" Signature Light Foam Gasket – 0.5" Thick
Complete compatible Signature Series lighting installations with Kaper II's 18" Signature Light Foam Gasket. Featuring a 0.5-inch-thick foam construction, this accessory is designed for use with compatible 18-inch Signature lights. Positioned between mating surfaces as specified by the manufacturer, the gasket provides a compressible interface that can help accommodate minor surface irregularities and support a more consistent installation. Verify gasket dimensions, compression requirements, and light compatibility before installation.
2" Round Closed-Back Light Housing – Protective Mounting Enclosure
Give compatible 2-inch round vehicle lights a clean, protected mounting solution with this Closed-Back Light Housing. Unlike an open-back grommet installation, the enclosed rear design helps shield the back of the light and wiring connection while creating a finished mounting appearance. Ideal for compatible RVs, trailers, trucks, commercial vehicles, utility equipment, and specialty vehicle applications.
2" Round Marker Light Grommet – Standard Open-Back Design
Securely mount compatible 2-inch round marker lights with this Standard Open-Back Grommet. Designed to hold the light neatly within a compatible mounting opening, the open-back configuration provides clearance for wiring and electrical connections. Ideal for RVs, trailers, trucks, commercial vehicles, utility equipment, and specialty vehicle lighting applications.
2" Universal LED Light Bar Clamp – Black Anodized Aluminum Mounting Bracket
Mount compatible LED light bars without drilling into your vehicle or equipment with this 2-Inch Universal LED Light Bar Clamp. Designed to attach around compatible 2-inch tubing, the clamp features durable black anodized aluminum construction for a clean, rugged installation. Ideal for mounting auxiliary lighting on roll bars, roll cages, brush guards, racks, UTVs, ATVs, trucks, Jeeps, and specialty equipment.
2.5" x 1.5" Rectangular LED Marker & Clearance Light Mounting Grommet
Securely mount compatible 2.5" x 1.5" rectangular LED marker and clearance lights with this replacement Light Mounting Grommet. Designed to hold a compatible rectangular light securely within the mounting opening, the grommet provides a clean, finished installation for RVs, trailers, trucks, utility trailers, commercial vehicles, and specialty equipment.
3-Way Male Weather-Pack Electrical Connector Kit – Housing, Male Terminals & Wire Seals
Create a clean, secure electrical connection with this 3-Way Male Weather-Pack Connector Kit. The kit includes a 3-position male connector housing, male terminals, and wire seals for compatible automotive and vehicle wiring applications. Ideal for RV, trailer, truck, automotive, off-road, commercial vehicle, and LED lighting wiring repairs or custom installations.
4" Round Surface-Mount Light Bezel – Snap-On Chrome-Plated Plastic
Give compatible 4-inch round surface-mount lights a clean, polished finish with this Snap-On Chrome-Plated Plastic Bezel. Designed to snap onto a compatible light installation, the bezel adds a bright chrome appearance without the weight of a solid metal trim ring. Ideal for RVs, motorhomes, trailers, trucks, commercial vehicles, and custom vehicle lighting applications.
4.08" x 1.08" Chrome LED Marker Light Base – Bullet Connector
Create a clean, chrome-finished mounting point for compatible 4.08" x 1.08" marker lights with this Chrome Marker Light Base with Bullet Connector. Designed for RV, trailer, truck, and commercial vehicle lighting applications, the base combines a polished appearance with a bullet-style electrical connection for compatible installations. Ideal for replacement marker lights, clearance lighting, trailer lighting, and custom vehicle builds.
4.08" x 1.08" Chrome LED Marker Light Base – Dual Wire Leads
Create a clean, polished mounting solution for compatible 4.08" x 1.08" LED marker and clearance lights with this Chrome Marker Light Base with Dual Wire Leads. Designed for straightforward hardwired installations, the two-wire configuration provides convenient electrical connection for compatible RVs, trailers, trucks, commercial vehicles, utility trailers, and replacement vehicle lighting applications.
4.08" x 1.08" Chrome LED Marker Light Base – Single Wire Lead
Create a clean, polished mounting solution for compatible 4.08" x 1.08" LED marker and clearance lights with this Chrome Marker Light Base with Single Wire Lead. Designed for compatible single-wire lighting installations, the chrome-finished base provides a professional appearance for RVs, trailers, trucks, commercial vehicles, utility trailers, and replacement vehicle lighting applications.
4-Inch Round Closed-Back Light Housing – Protective Mounting Housing for Truck & Trailer Lights
4-inch round closed-back light housing designed to support and protect compatible round vehicle lights. The enclosed rear design helps shield the back of the lamp and wiring area while providing a clean mounting solution for compatible truck, trailer, RV, commercial vehicle, and equipment lighting.
5" x 3" Rectangular LED Light Mounting Grommet – RV, Trailer & Truck
Securely mount compatible 5" x 3" rectangular LED lights with this Light Mounting Grommet. Designed to hold a compatible light securely within the mounting opening, the grommet creates a clean, finished installation while helping isolate the fixture from the surrounding panel. Ideal for RVs, trailers, utility trailers, trucks, commercial vehicles, and replacement vehicle lighting applications.
6" Chevy-Style Side Marker Light Socket Assembly – Black & Red Wire Leads
Replace or repair compatible 6-inch Chevy-style side marker lights with this Side Marker Light Socket Assembly featuring black and red wire leads. Designed to provide the socket and wiring connection for compatible marker-light installations, this assembly is ideal for Chevrolet-style vehicle lighting, trucks, automotive restoration, custom builds, and replacement side marker light repairs.
6" Oval Flush-Mount LED Light Grommet – RV, Trailer & Truck Replacement Mount
Securely install compatible 6-inch oval LED lights with this Flush-Mount Light Grommet. Designed to hold the light within the mounting opening for a clean, low-profile appearance, this replacement grommet is ideal for compatible stop, turn, tail, backup, and utility lights on RVs, trailers, trucks, commercial vehicles, and utility equipment.
8" Chrome Fender-Mount Light Bezel with Wire Guard – RV, Trailer & Truck
Protect and dress up compatible 8-inch fender-mounted vehicle lights with this Chrome Light Bezel with Wire Guard. The chrome-finished bezel creates a polished exterior appearance while the integrated wire guard helps provide added protection for the light. Ideal for compatible RVs, trailers, trucks, commercial vehicles, utility trailers, and specialty vehicle lighting applications.
- 1
- 2