Lighting Accessories

Replace or repair compatible 6-inch Chevy-style side marker lights with this Side Marker Light Socket Assembly featuring black and red wire leads. Designed to provide the socket and wiring connection for compatible marker-light installations, this assembly is ideal for Chevrolet-style vehicle lighting, trucks, automotive restoration, custom builds, and replacement side marker light repairs.

Securely install compatible 6-inch oval LED lights with this Flush-Mount Light Grommet. Designed to hold the light within the mounting opening for a clean, low-profile appearance, this replacement grommet is ideal for compatible stop, turn, tail, backup, and utility lights on RVs, trailers, trucks, commercial vehicles, and utility equipment.

Protect and dress up compatible 8-inch fender-mounted vehicle lights with this Chrome Light Bezel with Wire Guard. The chrome-finished bezel creates a polished exterior appearance while the integrated wire guard helps provide added protection for the light. Ideal for compatible RVs, trailers, trucks, commercial vehicles, utility trailers, and specialty vehicle lighting applications.

Restore a secure, factory-style installation for compatible 90mm projection headlights with this Original-Design Mounting Bracket. Designed as a replacement for the original mounting configuration, it provides the support needed to properly position compatible 90mm headlight modules. Ideal for RVs, motorhomes, buses, trucks, commercial vehicles, fleet equipment, and specialty vehicle applications.

Replace or upgrade compatible 90mm projection headlight installations with this Special Design #20235 Mounting Bracket. Designed for compatible REV / Fleetwood applications, the bracket provides a purpose-built mounting solution for headlight replacement, repair, or lighting upgrades. Ideal for motorhome service, restoration, and retrofit projects where the original headlight mounting configuration requires an updated or specialized bracket.

Add a clean, polished finish to compatible 3/4-inch round LED marker and clearance lights with this Chrome Light Bezel. Designed to fit compatible 3/4" marker lights, the bezel creates a finished exterior appearance that's ideal for RVs, trailers, trucks, utility trailers, commercial vehicles, and custom vehicle lighting installations.

Give compatible fender-mounted vehicle lights a clean, polished appearance with this Chrome Fender-Mount Light Bezel. Designed as a decorative surround for compatible exterior lighting, the chrome finish adds a sharp, finished look to RVs, motorhomes, trailers, trucks, commercial vehicles, and specialty vehicle applications.

Refresh the appearance of a compatible exterior light with this Chrome Replacement Bezel for Euro-Style RV Porch Lights. Designed as a replacement trim component, the chrome bezel provides a clean, finished appearance around compatible RV, trailer, camper, and motorhome porch-light assemblies.

Give compatible 7.5mm Dragon Eyes™ LED lights a clean, polished finish with this Chrome Bezel. Designed to surround individual 7.5mm Dragon Eyes™ LEDs, the bezel adds a bright chrome accent while maintaining the light's compact profile. Ideal for custom RV, trailer, truck, automotive, motorcycle, and commercial vehicle LED lighting installations.

Give compatible 7.5mm Dragon Eyes™ LED lights a clean, finished installation with the Dragon Eyes™ EdgeFit Black Bezel. The low-profile EdgeFit design helps conceal the edges of the mounting hole while adding a sleek black exterior finish for compatible RV, trailer, motorhome, truck, and commercial vehicle lighting applications.

Add a clean, custom finish to compatible 7.5mm Dragon Eyes™ LED marker lights with the EdgeFit Chrome Bezel. Designed to frame the compact LED with a polished chrome accent, this bezel is ideal for custom RV, trailer, truck, automotive, motorcycle, and specialty vehicle lighting installations.

Give compatible 7.5mm Dragon Eyes™ LED lights a clean, custom-finished appearance with the EdgeFit Chrome Bezel. Designed to surround compatible compact LED marker lights, the chrome bezel adds a polished accent that helps small-format lighting stand out. Ideal for RVs, trailers, trucks, motorcycles, commercial vehicles, and custom automotive lighting installations.

Give compatible Dragon Eyes™ stop, tail, and turn lights a clean, finished appearance with the Dragon Eyes™ EdgeFit Chrome Bezel. Featuring a low-profile EdgeFit design and chrome-plated finish, this trim bezel helps conceal mounting edges while adding a polished custom look to compatible RV, trailer, motorhome, truck, and commercial vehicle lighting installations.

Give compatible Dragon Eyes™ LED lights a clean, polished finish with the Standard Chrome Bezel. Designed to create a sharp chrome surround around compact LED lighting, this bezel is ideal for custom truck, RV, trailer, automotive, motorcycle, commercial vehicle, and specialty lighting installations.

Give your compatible Dragon Eyes™ 3-Light LED Identification Bar a clean, polished finish with this Standard-Fit Chrome Bezel. Designed specifically as a trim surround for the three-light Dragon Eyes™ ID bar, the chrome bezel adds a sharp finished appearance to RV, trailer, truck, commercial vehicle, and custom exterior lighting installations.

Securely mount or reposition compatible LED light bars with these Heavy-Duty Side-Mounting Brackets. Designed to support the light bar from both ends, these brackets provide a rugged mounting solution for replacement, repair, relocation, and custom installations on compatible trucks, Jeeps, UTVs, ATVs, side-by-sides, work vehicles, and off-road equipment.

Build or repair compatible Weather-Pack electrical connectors with this Male Connector Terminal. Designed to crimp onto compatible wire and lock into the appropriate Weather-Pack connector housing, this replacement terminal is ideal for automotive, RV, trailer, truck, LED lighting, off-road, commercial vehicle, and custom wiring harness applications.

Add amber reflective visibility around compatible 3/4-inch LED marker lights with this 3.72" x 2.15" Oval Amber Reflector. Designed with a center opening for compatible 3/4" lights, the reflector combines marker-light installation with a larger reflective surface. Adhesive and screw mounting options provide installation flexibility for RVs, trailers, trucks, utility trailers, commercial vehicles, and specialty equipment.

Add red reflective visibility around compatible 3/4-inch LED marker lights with this 3.72" x 2.15" Oval Red Reflector. Designed with a center opening for compatible 3/4" lights, the reflector combines a compact marker-light location with a larger reflective surface. Adhesive and screw-mount options provide flexible installation for RVs, trailers, utility trailers, trucks, commercial vehicles, and specialty equipment.

Replace damaged or worn wiring with this Replacement Light Pigtail for L02-0014 and L02-0015 lights. Designed specifically for compatible Kaper II/Woody’s lighting applications, this pigtail provides the electrical connection needed for replacement, repair, or custom vehicle-light installations. Ideal for RVs, trailers, trucks, commercial vehicles, and specialty equipment using L02-0014 or L02-0015.

The Replacement Mounting Bracket Hardware Kit is designed for compatible L16-0075 through L16-0102 products. Ideal for replacement, repair, or service applications, this hardware provides the mounting components needed to support proper installation of compatible fixtures.

Replacement wiring pigtail for L01-0011 and L01-0012 lighting applications. Designed to provide a compatible electrical connection for installation, repair, or replacement of an existing connector.

Replace or repair compatible vehicle-light wiring with this Standard Male Plug with 2-Wire Leads. Designed for compatible lighting and electrical connections, the male plug provides a straightforward two-wire pigtail connection for RVs, trailers, trucks, commercial vehicles, LED lighting, and specialty vehicle applications.

Replace or repair compatible vehicle-light wiring with this Standard Male Plug with 3-Wire Leads. Designed for lighting applications requiring a three-wire electrical connection, this replacement pigtail is ideal for compatible stop, turn, tail, marker, auxiliary, and multi-function LED lights on RVs, trailers, trucks, commercial vehicles, and specialty equipment.

Replace damaged or worn wiring on compatible V8000 left- or right-side light assemblies with this Replacement Socket Pigtail. Designed as a dedicated electrical socket and wiring connection for compatible V8000 lighting, this pigtail is ideal for RV, motorhome, trailer, truck, commercial vehicle, and specialty vehicle lighting repairs.