W2403 Front Axle Cover – 8-Lug, Chrome Finish, A-17 Pop-Out Center
RESTORE THE FINISH. KEEP THE COMPLETE LOOK.
Maintain a clean, polished wheel appearance with the Kaper II W2403 Front Axle Cover, designed for compatible 8-lug W2403 wheel applications.
Featuring a reflective chrome finish, this front axle cover provides a replacement option for an existing compatible wheel assembly.
The cover includes an A-17 removable pop-out center cap and uses a bolt-on mounting configuration.
With overall dimensions of 13.95 inches long, 13.95 inches wide, and 4.05 inches high, the cover is intended for the front wheel position.
Key Features & Benefits
Chrome Finish: Provides a bright, reflective exterior appearance.
W2403 Wheel Application: Identified for compatible W2403 wheel configurations.
8-Lug Configuration: Designed for the specified 8-lug wheel application.
A-17 Pop-Out Center: Includes a removable center cap.
Bolt-On Mounting: Uses a mechanical bolt-on attachment configuration.
Front Wheel Position: Specifically intended for front axle cover applications.
Individual Replacement Component: Allows the front cover to be replaced separately from a complete wheel simulator kit.
Defined Dimensions: Measures 13.95" L × 13.95" W × 4.05" H.
Chrome-Finished Exterior
The W2403 Front Axle Cover features a chrome finish that complements the appearance of compatible wheel simulator components.
Its reflective exterior provides a polished look around the front wheel assembly, helping maintain a coordinated appearance when replacing an existing axle cover.
The underlying material is believed to be stainless steel but has not yet been independently confirmed. Accordingly, the product is described by its verified chrome finish rather than an unverified material specification.
Designed for W2403 8-Lug Applications
This front axle cover is identified for W2403 wheels with an 8-lug configuration.
Its application is specific to the compatible wheel and mounting arrangement. The 8-lug designation alone does not establish compatibility with every 8-lug wheel.
Customers should confirm the W2403 wheel identification and the required cover configuration before ordering.
Removable A-17 Pop-Out Center Cap
The cover includes an A-17 pop-out center cap.
The center cap is removable, distinguishing this product from a permanently enclosed, one-piece front axle cover.
Because the cap is included with the cover, customers do not need to identify it as a separate component when ordering this assembly.
The exact retention mechanism and recommended removal procedure have not been verified.
Bolt-On Mounting Configuration
The W2403 Front Axle Cover uses a bolt-on attachment configuration.
This provides a defined mechanical mounting method for compatible wheel installations.
The specific attachment hardware, fastener dimensions, and hardware inclusion have not yet been confirmed.
Installers should verify the existing wheel configuration and applicable installation requirements before fitting the replacement cover.
Front Axle Cover Dimensions
The cover measures:
Length: 13.95 inches
Width: 13.95 inches
Height: 4.05 inches
These measurements describe the front axle cover itself rather than the diameter of the wheel.
The dimensions can help customers compare an existing cover with the replacement component.
Individual Replacement Cover
This product is an individual front axle cover with an included A-17 removable center cap.
It is not a complete wheel simulator kit.
Customers replacing an existing front cover can source the individual component while retaining other compatible wheel simulator parts.
This makes the product useful for replacement-part ordering, vehicle maintenance, and parts distribution.
Product Compatibility
The confirmed product identification is:
Additional simulator kit compatibility, wheel diameter, bolt circle, and included mounting hardware should be confirmed against the specific product record before being advertised as direct fitment specifications.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Product Type | Front Axle Cover |
| Wheel Application | W2403 |
| Lug Configuration | 8-Lug |
| Wheel Position | Front |
| Finish | Chrome |
| Base Material | Pending Confirmation |
| Mounting | Bolt-On |
| Center Cap | A-17 Pop-Out |
| Center Cap Included | Yes |
| Center Cap Removable | Yes |
| Length | 13.95" |
| Width | 13.95" |
| Height | 4.05" |
| Package Configuration | Individual Front Axle Cover |
| Mounting Hardware Included | Not Confirmed |
Product Selection Considerations
Before ordering, confirm that the existing wheel is the W2403 application and uses the required 8-lug configuration.
Check the existing axle cover dimensions and mounting arrangement.
Verify that the replacement is intended for the front wheel position.
The A-17 pop-out center cap is included with this product.
The front cover should not be assumed interchangeable with a rear cover or with axle covers designed for different simulator models.
The Kaper II Advantage
REPLACE THE COVER. KEEP THE POLISHED LOOK.
The Kaper II W2403 8-Lug Front Axle Cover provides an individual replacement option for compatible front wheel applications.
With its chrome finish, bolt-on mounting, removable A-17 pop-out center, and defined dimensions, this cover helps maintain a coordinated wheel appearance without replacing the complete simulator assembly.