Front Axle Cover with A-17 Pop-Out Center – SS-28487RV, 10-Lug
THE RIGHT REPLACEMENT. THE RIGHT FINISH. THE RIGHT FIT.
Maintain the polished appearance of your RV or motorhome's front wheel assembly with the Kaper II Front Axle Cover, designed for the SS-28487RV wheel simulator kit.
Manufactured from stainless steel with a bright chrome-plated finish, this individual replacement cover includes an A-17 removable pop-out center cap that provides access to the axle and hub area.
Designed for bolt-on, stud-mounted installation, the cover offers a practical replacement option for compatible wheel simulator assemblies without requiring the purchase of an entire simulator set.
The SS-28487RV simulator kit is identified for 22.5" × 8.25" wheels featuring a 10-lug, 285.7mm bolt circle, five hand holes, and a 33mm lug nut specification.
This front axle cover is specifically associated with that simulator kit, providing a model-based replacement solution for existing Kaper II installations.
Key Features & Benefits
Chrome-Plated Stainless Steel: Combines stainless steel construction with a bright, reflective exterior finish.
A-17 Pop-Out Center Cap Included: Removable center provides access to the axle and hub area.
10-Lug Simulator Application: Identified for the SS-28487RV wheel simulator kit.
Bolt-On / Stud-Mounted Design: Uses a stud-mounted attachment configuration.
Individual Front Cover: Sold as one front axle cover assembly rather than a complete simulator kit.
Defined Dimensions: Measures 14" long × 13.9" wide × 4" high.
RV & Motorhome Applications: Designed as a replacement component for the specified RV wheel simulator assembly.
Compatible Simulator Identification: Associated with Kaper II SS-28487RV, a 22.5" × 8.25", 10-lug wheel simulator kit.
Replacement Convenience: Allows the front axle cover assembly to be sourced separately.
Stainless Steel Construction
The Kaper II Front Axle Cover is manufactured from stainless steel, providing a durable metallic component for exterior wheel applications.
Stainless steel is commonly selected for vehicle accessories because of its corrosion resistance and ability to support a polished exterior appearance.
For RVs and motorhomes, wheel accessories are exposed to changing weather conditions, road moisture, and routine vehicle cleaning.
The stainless steel construction provides a practical material foundation for this replacement component.
The exact stainless steel grade and material thickness have not been specified.
Bright Chrome-Plated Finish
This front axle cover features a chrome-plated exterior finish.
The bright, reflective surface complements the polished appearance of compatible wheel simulator assemblies.
Maintaining a consistent finish across wheel accessories is particularly important when replacing an individual component within an existing simulator set.
The chrome-plated finish helps the replacement cover coordinate visually with other bright-finish components.
This product is identified as chrome-plated stainless steel, rather than mirror-polished, unplated stainless steel.
Designed for the SS-28487RV Wheel Simulator Kit
This front axle cover is identified as a replacement component for Kaper II wheel simulator kit SS-28487RV.
The compatible simulator kit has the following specifications:
Wheel Size: 22.5" × 8.25"
Lug Configuration: 10-Lug
Bolt Circle: 285.7mm
Hand Holes: 5
Lug Nut Specification: 33mm
These specifications describe the complete SS-28487RV simulator kit and its intended wheel application.
They provide important reference information for customers identifying the correct replacement front axle cover.
The 33mm lug nut specification should not be interpreted as the wheel stud diameter or as confirmation that lug nuts are included with this individual cover.
Customers should verify the installed simulator kit model before ordering.
A-17 Removable Pop-Out Center Cap
The front axle cover includes an A-17 pop-out center cap.
This removable center provides access to the axle and hub area while allowing the cover to maintain a complete appearance when the center is installed.
The pop-out center design is especially useful for applications where access to the corresponding axle or hub area is required.
Rather than treating the front cover as a completely closed assembly, the A-17 center provides a removable central component.
The exact center-cap retention method and removal procedure have not been specified.
Installers should follow the applicable Kaper II installation and removal instructions.
Bolt-On, Stud-Mounted Configuration
This front axle cover uses a bolt-on, stud-mounted attachment configuration.
The mounting design distinguishes it from snap-on or press-fit axle covers.
Because wheel simulator mounting methods can vary, customers should confirm the receiving assembly and mounting configuration before installation.
The quantity and type of mounting hardware supplied with this individual cover have not been confirmed.
The 33mm lug nut specification associated with SS-28487RV should not be treated as confirmation of the hardware included with the replacement cover.
Front Axle Cover Dimensions
The individual front axle cover measures:
Length: 14 inches
Width: 13.9 inches
Height: 4 inches
These measurements identify the replacement cover itself rather than the 22.5-inch wheel diameter associated with the compatible simulator kit.
Customers should use the cover dimensions alongside the simulator kit identification when verifying the correct replacement component.
Individual Replacement Component
This product is sold as one front axle cover with its A-17 pop-out center cap.
It is not a complete wheel simulator set.
The SS-28487RV simulator kit may include additional front and rear simulator components that are not part of this individual replacement product.
Offering the front cover separately allows customers to replace the required component while retaining other serviceable parts of the existing wheel simulator installation.
This can simplify replacement-part sourcing for RV owners, motorhome maintenance providers, and parts distributors.
RV & Motorhome Wheel Accessories
The SS-28487RV wheel simulator kit is identified for RV and motorhome applications.
The front axle cover provides a replacement option for compatible vehicles equipped with that simulator assembly.
A bright, coordinated wheel finish contributes to the exterior appearance of an RV or motorhome.
Replacing a missing or damaged front axle cover can help restore the visual consistency of the existing wheel simulator installation.
Vehicle compatibility should be established through the installed wheel simulator model and applicable wheel specifications rather than vehicle type alone.
Important Compatibility Considerations
This cover is identified for SS-28487RV, a 10-lug simulator kit with a 285.7mm bolt circle.
It should not be confused with the previously listed A-17 four-cover kit designed for an 8-lug, 275mm bolt-circle application.
Although both products reference an A-17 removable center design, the complete cover assemblies have different identified applications and mounting configurations.
Likewise, this product should not be confused with the separately sold pop-out center cap.
Customers requiring only the removable center cap should select the appropriate center-cap replacement product.
Customers requiring the front axle cover assembly with the center cap included should select this product after confirming simulator compatibility.
Ideal Applications
RV Wheel Simulator Maintenance: Replacing the front axle cover on compatible SS-28487RV wheel simulator assemblies.
Motorhome Wheel Accessories: Maintaining the polished appearance of supported front wheel simulator installations.
Replacement Parts Distribution: Supplying an individual front cover assembly identified by its compatible simulator SKU.
Vehicle Restoration & Maintenance: Replacing a missing, damaged, or worn front axle cover without purchasing a complete simulator kit.
Wheel Accessory Service: Sourcing the correct front cover assembly with an included removable center cap.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Product Type | Front Axle Cover Assembly |
| Compatible Simulator SKU | SS-28487RV |
| Cover Material | Stainless Steel |
| Finish | Chrome-Plated |
| Wheel Position | Front |
| Center Cap | A-17 Pop-Out Center |
| Center Cap Included | Yes |
| Center Function | Removable for Axle/Hub Access |
| Mounting Configuration | Bolt-On / Stud-Mounted |
| Cover Length | 14" |
| Cover Width | 13.9" |
| Cover Height | 4" |
| Package Quantity | 1 Front Axle Cover with Center Cap |
| Intended Vehicle Application | RV / Motorhome |
Compatible SS-28487RV Simulator Kit Specifications
| Specification | SS-28487RV Kit |
|---|
| Wheel Size | 22.5" × 8.25" |
| Lug Configuration | 10-Lug |
| Bolt Circle | 285.7mm |
| Hand Holes | 5 |
| Lug Nut Specification | 33mm |
Product Selection & Installation Considerations
Before ordering, verify that the existing wheel simulator assembly is Kaper II SS-28487RV.
Confirm that the replacement is intended for the front axle cover assembly rather than the removable A-17 center cap alone.
Check the wheel simulator's mounting configuration and the required attachment hardware.
Do not assume compatibility with 8-lug axle cover kits or other 10-lug simulator models solely because they share a similar appearance.
Follow the applicable Kaper II installation instructions and vehicle manufacturer requirements.
The Kaper II Advantage
REPLACE THE COVER. KEEP THE COMPLETE LOOK.
The Kaper II Front Axle Cover for SS-28487RV provides a dedicated replacement component for compatible RV and motorhome wheel simulator installations.
Featuring chrome-plated stainless steel construction, a removable A-17 center cap, stud-mounted attachment, and defined 14" × 13.9" × 4" dimensions, this individual front cover helps maintain the appearance and functionality of the existing simulator assembly.
A COMPLETE FRONT COVER. WITHOUT THE COMPLETE KIT.