L03-0106 Single-Stack Amber LED Warning Beacon – Class I, 12–24V DC
COMPACT PROFILE. CLEAR AMBER WARNING.
The Kaper II L03-0106 Single-Stack Amber LED Warning Beacon combines a low-profile, single-layer lighting configuration with amber warning illumination and 12–24V DC operation.
Designed for compatible vehicle and equipment warning-light applications, this beacon features an amber polycarbonate lens, a plastic/aluminum base, and three-bolt mounting.
The supplied Kaper II product sheet identifies the L03-0106 as an ECE R65 Class I warning beacon.
At approximately 6 inches wide and 2.5 inches tall, the single-stack model is the shortest beacon in the L03-0106 product family.
Current product information specifies 12 amber LEDs and 18 flash patterns. An earlier Kaper II catalog lists 24 diodes and an R65 flash pattern without identifying the total number of patterns. These details require confirmation before being treated as final specifications.
Key Features & Benefits
Single-Stack Design: Compact, single-layer amber warning-light configuration.
Amber LED Illumination: Provides an amber warning-light appearance.
12–24V DC Operation: Supports compatible vehicle and equipment electrical systems.
ECE R65 Class I Catalog Designation: Listed as Class I in the supplied Kaper II product sheet.
Amber Polycarbonate Lens: Provides the specified lens construction and color.
Plastic/Aluminum Base: Uses the base materials identified in the catalog.
Three-Bolt Mounting: Provides a defined mounting configuration.
Compact Height: Measures approximately 2.5 inches tall.
6-Inch Width: Provides the specified overall width for installation planning.
Single-Stack Warning Beacon Design
The L03-0106 features one amber lighting section above a black mounting base.
This design distinguishes it from the taller double-stack L03-0106-DS and triple-stack L03-0106-TS models.
The compact configuration can be considered where a shorter warning-light profile is desirable.
Installation suitability depends on the available mounting surface, clearance, and applicable vehicle requirements.
Amber LED Warning Illumination
The beacon uses amber LED illumination.
The current product title identifies 12 LEDs, while the earlier catalog identifies 24 diodes.
Because the two sources disagree, the final LED count should be verified against the physical product or current manufacturer specifications.
Individual LED wattage, total power consumption, and measured luminous output have not been supplied.
Flash Pattern Configuration
The current product title identifies 18 flash patterns.
The supplied Kaper II catalog lists an R65 flash pattern but does not establish a total pattern count for the single-stack model.
The exact available flash sequences, pattern-selection method, and synchronization capability have not been verified.
The 18-pattern specification should be confirmed before publication.
ECE R65 Class I Catalog Designation
The supplied Kaper II catalog identifies the L03-0106 as ECE R65 Class I.
ECE R65 addresses the performance of special warning lamps.
The catalog designation is relevant when comparing warning-light equipment.
The current approval status, certification documentation, approval number, and authorized installation configurations have not been independently verified.
12–24V DC Operation
The beacon is specified for 12–24V DC operation.
This range supports consideration for compatible vehicle and equipment electrical systems.
Current draw, wattage, wiring polarity, and circuit protection requirements have not been provided.
Amber Polycarbonate Lens
The beacon features an amber polycarbonate lens.
The supplied image shows a ribbed amber lens beneath a black top cover.
Polycarbonate is a durable thermoplastic commonly used in vehicle lighting applications.
Specific impact ratings, UV-resistance specifications, and environmental protection ratings have not been verified.
Plastic/Aluminum Base
The L03-0106 features a plastic/aluminum base.
The product image shows a broad black base supporting the amber lighting assembly.
Specific material composition, finish, and corrosion-resistance ratings have not been provided.
Three-Bolt Mounting
The beacon uses a three-bolt mounting configuration.
The supplied catalog includes a bottom view of the mounting arrangement.
Exact mounting-hole spacing, fastener dimensions, and installation requirements have not been verified.
Vehicle and Equipment Applications
The beacon may be considered for compatible commercial, service, utility, and industrial equipment warning-light applications where amber warning lights are appropriate and permitted.
Specific vehicle fitment, operating approvals, and jurisdictional requirements must be verified.
Product Dimensions
The supplied Kaper II catalog lists:
The mounting-hole dimensions and required installation clearance have not been provided.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Part Number | L03-0106 |
| Product Type | Single-Stack LED Warning Beacon |
| Stack Configuration | Single |
| LED Color | Amber |
| Lens Color | Amber |
| Lens Material | Polycarbonate |
| LED Count | 12 Current Title / 24 Earlier Catalog — Verify |
| Flash Patterns | 18 Current Title / R65 Pattern Earlier Catalog — Verify |
| ECE R65 Designation | Class I — Catalog Listed |
| Operating Voltage | 12–24V DC |
| Base Material | Plastic / Aluminum |
| Mounting | 3-Bolt |
| Width | 6" |
| Height | 2.5" |
The Kaper II Advantage
ONE STACK. ONE CLEAR PURPOSE.
The Kaper II L03-0106 Single-Stack Amber LED Warning Beacon combines a compact warning-light profile with amber illumination, 12–24V DC operation, and three-bolt mounting.
Its amber polycarbonate lens, plastic/aluminum base, and catalog-listed ECE R65 Class I designation provide key specifications for customers evaluating compatible warning-light installations.
COMPACT DESIGN. VISIBLE WARNING.