L03-0106-DS | Double-Stack Amber LED Warning Beacon – 24 LEDs, 18 Flash Patterns, 12–24V

Increase warning-light visibility with the Kaper II L03-0106-DS Double-Stack Amber LED Beacon. Featuring 24 amber LED diodes, 18 flash patterns, and 12–24V DC operation, this beacon delivers flashing amber warning illumination in a distinctive two-tier design. The polycarbonate amber lens, plastic/aluminum base, and three-bolt mounting configuration make it a practical option for compatible commercial vehicle, service, and utility equipment applications. Listed as ECE R65 Class II in the Kaper II catalog, the beacon measures approximately 6" wide × 4.35" tall and includes 12" leads.

Sku: L03-0106-DS
focuspoint.productsaleshistory.orderfocuspoint.productsaleshistory.quantityfocuspoint.productsaleshistory.ordercreateddate
focuspoint.productsaleshistory.noproductsaleshistory
Disponibilidad:
Precio: Convocatoria de precios
i h h

L03-0106-DS Double-Stack Amber LED Warning Beacon – 24 LEDs, 18 Flash Patterns

DOUBLE THE STACK. MAKE THE WARNING STAND OUT.

The Kaper II L03-0106-DS Double-Stack Amber LED Warning Beacon combines 24 amber LEDs, 18 flash patterns, and a distinctive two-tier lighting configuration.

Designed for compatible vehicle and equipment warning-light applications, this beacon operates on 12–24V DC and features an amber polycarbonate lens, plastic/aluminum base, and three-bolt mounting arrangement.

The Kaper II catalog identifies the double-stack model with an ECE R65 Class II designation.

Measuring approximately 6 inches wide and 4.35 inches tall, the beacon offers a taller lighting profile than the single-stack L03-0106 while remaining shorter than the triple-stack L03-0106-TS.

Key Features & Benefits

  • Double-Stack Design: Two vertically arranged amber lighting sections create a distinctive warning-light profile.

  • 24 Amber LEDs: Provides the specified LED configuration for the double-stack beacon.

  • 18 Flash Patterns: Offers multiple warning-light flash options.

  • ECE R65 Class II Catalog Designation: Identified as Class II in the Kaper II product sheet.

  • 12–24V DC Operation: Supports compatible vehicle and equipment electrical systems within the stated voltage range.

  • Polycarbonate Amber Lens: Features the specified amber lens construction.

  • Plastic/Aluminum Base: Combines the catalog-listed base materials.

  • Three-Bolt Mounting: Provides a defined mounting arrangement for compatible surfaces.

  • 12-Inch Leads: Provides the specified lead length for electrical installation planning.

  • 6-Inch Width: Nominal width of the beacon assembly.

  • 4.35-Inch Height: Double-stack profile for an elevated warning-light configuration.

Double-Stack Amber Warning Design

The L03-0106-DS features two vertically stacked amber lighting sections.

This configuration distinguishes it from the single-stack and triple-stack models in the same Kaper II product family.

The double-stack design creates a taller warning-light appearance than the single-stack model without reaching the height of the triple-stack version.

The actual suitability of the beacon for a particular mounting location depends on available clearance and applicable installation requirements.

24 Amber LED Diodes

The beacon features 24 amber LED diodes.

These LEDs provide the light source for the warning-light assembly.

The supplied product sheet does not specify the individual LED wattage, total power consumption, or measured luminous output.

18 Flash Patterns

The L03-0106-DS is specified with 18 flash patterns.

The Kaper II catalog describes the model as an ECE R65 Flash & Rotate Class II beacon.

The term "rotate" is retained as catalog terminology and does not establish that the beacon contains a mechanically rotating assembly.

The exact individual flash sequences and pattern-selection method have not been supplied.

ECE R65 Class II Designation

The supplied Kaper II product sheet identifies the L03-0106-DS as ECE R65 Class II.

ECE R65 addresses the performance of special warning lamps.

This catalog designation is useful when comparing warning-light equipment for compatible applications.

The approval number, current certification documentation, and specific approved installation configurations have not been provided.

Customers should verify the relevant regulatory requirements before installation.

12–24V DC Operation

The beacon operates on 12–24V DC.

This range allows it to be considered for compatible 12V and 24V vehicle and equipment electrical systems.

Current draw, wattage, wiring polarity, and circuit protection requirements have not been supplied.

Amber Polycarbonate Lens

The beacon features an amber polycarbonate lens.

Polycarbonate is a durable thermoplastic commonly used in lighting applications.

The amber lens surrounds the LED warning-light assembly.

Specific impact ratings, UV-resistance specifications, and environmental protection ratings have not been verified.

Plastic/Aluminum Base

The L03-0106-DS uses a plastic/aluminum base.

The product image shows a black mounting base supporting the amber lighting assembly.

The precise material composition, surface finish, and corrosion-resistance specifications have not been provided.

Three-Bolt Mounting

The beacon uses a three-bolt mounting configuration.

This provides three mounting points for securing the assembly to a compatible surface.

The exact bolt dimensions, mounting-hole spacing, and installation hardware details have not been verified.

12-Inch Leads

The original product title specifies 12-inch leads.

These provide the electrical lead length for installation planning.

The conductor count, wire colors, connector type, and wiring functions have not been confirmed for this model.

Vehicle and Equipment Applications

The L03-0106-DS may be considered for compatible warning-light applications involving commercial vehicles, service equipment, utility vehicles, and industrial equipment where amber warning lights are appropriate.

Specific vehicle fitment, operating approvals, and jurisdictional requirements must be verified before installation.

Overall Dimensions

The Kaper II product sheet lists the following dimensions:

  • Width: 6"

  • Height: 4.35"

The detailed mounting-hole dimensions and installation clearance requirements have not been supplied.

Product Specifications

SpecificationDetails
ManufacturerKaper II
Part NumberL03-0106-DS
Product TypeDouble-Stack LED Warning Beacon
Stack ConfigurationDouble
LED Count24
LED ColorAmber
Lens ColorAmber
Lens MaterialPolycarbonate
Flash Patterns18
Catalog Flash DescriptionR65 Flash & Rotate
ECE R65 DesignationClass II
Operating Voltage12–24V DC
Base MaterialPlastic / Aluminum
Mounting3-Bolt
Lead Length12"
Width6"
Height4.35"

The Kaper II Advantage

TWO STACKS. TWENTY-FOUR LEDs. EIGHTEEN WAYS TO FLASH.

The Kaper II L03-0106-DS Double-Stack Amber LED Warning Beacon combines a distinctive two-tier design, 24 amber LEDs, and 18 flash patterns.

With 12–24V DC operation, a polycarbonate amber lens, and three-bolt mounting, it provides a practical warning-light option for compatible vehicle and equipment applications.

DOUBLE THE STACK. KEEP THE WARNING CLEAR.

*
*
*