5" Amber LED Battery-Powered Warning Beacon – 5 LEDs, Single Flash, Magnetic Mount

Improve warning-light visibility with the Kaper II Class I Amber LED Warning Beacon. Featuring 8 amber LEDs, 3 selectable flash patterns, and 12–24V DC operation, this beacon provides flashing amber illumination for compatible vehicle and equipment applications. The three-bolt mounting configuration and 12-inch wire lead support installation, while dedicated pattern-change and synchronization wires provide additional operating control. The beacon features amber LEDs behind an amber lens and is identified with a Class I catalog designation. Dimensions: 161.4mm × 120mm.

Sku: L03-0114
focuspoint.productsaleshistory.orderfocuspoint.productsaleshistory.quantityfocuspoint.productsaleshistory.ordercreateddate
focuspoint.productsaleshistory.noproductsaleshistory
Disponibilidad:
Precio: Convocatoria de precios
i h h

Class I Amber LED Warning Beacon – 8 LEDs, 3 Flash Patterns, 12–24V DC

BUILT TO SIGNAL. DESIGNED TO STAND OUT.

The Kaper II Class I Amber LED Warning Beacon provides flashing amber warning illumination for compatible vehicle and equipment applications.

Featuring 8 amber LEDs, 3 selectable flash patterns, and 12–24V DC operation, this beacon combines a recognizable amber warning-light profile with a three-bolt mounting configuration.

Its 12-inch wire lead includes dedicated connections for power, ground, flash-pattern changes, and synchronization.

The supplied product photograph shows an amber cylindrical lens above a black mounting base, along with a separate mounting component and installation hardware.

Key Features & Benefits

  • 8 Amber LEDs: Provides the specified LED light source for amber warning illumination.

  • 3 Selectable Flash Patterns: Allows selection among three supported warning-light patterns.

  • 12–24V DC Operation: Supports compatible vehicle and equipment electrical systems within the specified range.

  • Amber Lens and LEDs: Creates a coordinated amber warning-light appearance.

  • Three-Bolt Mounting: Provides a defined mounting configuration for compatible installation surfaces.

  • 12-Inch Wire Lead: Provides electrical wiring for installation planning.

  • Dedicated Pattern-Change Wire: Supports changing the beacon's flash pattern.

  • Synchronization Connection: Allows compatible beacons to be synchronized when set to the same pattern.

  • Class I Catalog Designation: Identified as Class I in the original product title.

Eight Amber LED Configuration

The beacon contains eight amber LEDs.

These LEDs provide the light source for its flashing warning-light function.

The exact LED arrangement, luminous output, wattage, and current draw have not been supplied.

Three Selectable Flash Patterns

The beacon supports three flash patterns.

A dedicated pattern-change wire provides a means of changing the selected pattern.

The exact pattern sequences and the procedure for changing between them have not been provided.

The beacon should not be advertised as having additional patterns or rotating mechanical components without verification.

Synchronization Capability

The supplied wiring information identifies a yellow synchronization wire.

For synchronization, compatible beacons must first be set to the same flash pattern before their yellow synchronization wires are connected together.

This provides a defined connection arrangement for synchronized operation.

The maximum number of synchronized beacons, supported synchronization modes, and additional wiring requirements have not been supplied.

12–24V DC Operation

The beacon is specified for 12–24V DC operation.

This allows it to be considered for compatible vehicle and equipment electrical systems within that operating range.

Actual operating voltage, wiring requirements, and circuit protection should be confirmed before installation.

Amber Lens and Diodes

The beacon features amber LEDs and an amber lens.

The product photograph shows a cylindrical, textured amber lens mounted above a black base.

The lens material, environmental protection rating, and impact-resistance specifications have not been verified.

Three-Bolt Mounting

The beacon uses a three-bolt mounting configuration.

The supplied image shows a mounting component and hardware alongside the beacon assembly.

The exact mounting-hole spacing, bolt dimensions, and installation requirements have not been provided.

Customers should confirm mounting compatibility before installation.

12-Inch Wire Lead

The beacon includes a 12-inch wire lead.

The supplied wiring information identifies the following connections:

Red Wire — Power Positive

Connects to the appropriate positive power supply.

Black Wire — Ground

Provides the electrical ground connection.

Blue Wire — Pattern Change

Used to change the selected flash pattern. The supplied note also references the chassis black wire, but the precise activation procedure has not been fully established.

Yellow Wire — Synchronization

Used to connect compatible beacons for synchronized operation. Beacons must be set to the same flash pattern before their yellow synchronization wires are connected together.

The complete wiring diagram, fuse requirements, and exact pattern-change procedure should be confirmed before installation.

Vehicle and Equipment Applications

This beacon may be considered for compatible vehicle and equipment warning-light applications, including service, utility, commercial, and industrial equipment where amber warning lights are appropriate and legally permitted.

Specific vehicle fitment, road-use approval, and regulatory certification have not been verified.

Product Dimensions

The original catalog information specifies:

161.4mm × 120mm

The supplied measurements are retained in their original order because the dimensions have not been explicitly identified as height, width, or diameter.

Mounting-hole spacing and installation clearance requirements have not been supplied.

Product Specifications

SpecificationDetails
ManufacturerKaper II
Product TypeLED Warning Beacon
Catalog ClassificationClass I
LED Count8
LED ColorAmber
Lens ColorAmber
Flash Patterns3
Operating Voltage12–24V DC
Mounting3-Bolt
Wire Lead12"
Red WirePositive Power
Black WireGround
Blue WirePattern Change
Yellow WireSynchronization
Dimensions161.4mm × 120mm

The Kaper II Advantage

EIGHT LEDs. THREE PATTERNS. ONE CLEAR WARNING.

The Kaper II Amber LED Warning Beacon combines selectable flashing patterns, synchronization wiring, and 12–24V DC operation in a three-bolt mounting configuration.

Its amber lens, dedicated control wiring, and 12-inch lead make it a practical warning-light option for compatible installations.

MAKE YOUR WARNING LIGHT WORK TOGETHER.

*
*
*