6" Oval Red LED Stop/Tail/Turn Light – 24 Diodes, 9–36V DC
THREE ESSENTIAL FUNCTIONS. ONE CLEAN LIGHTING SOLUTION.
Equip compatible utility and equipment trailers with the Kaper II 6" Oval Red LED Stop/Tail/Turn Light.
Featuring 24 red LED diodes, this combination rear light provides stop, tail, and turn signal functions within a single oval lighting assembly.
The light features a red polycarbonate lens, a standard 3-pin PL-3 electrical connection, and a 9–36V DC operating range.
Designed for installation using a compatible grommet mounting system, the light provides a practical rear-lighting option for trailer applications.
The mounting grommet is sold separately.
Key Features & Benefits
Three Lighting Functions: Combines stop, tail, and turn signaling in one assembly.
24 LED Diodes: Provides the specified LED configuration for the rear-lighting functions.
Red LED Illumination: Produces red light for the confirmed stop, tail, and turn applications.
Red Polycarbonate Lens: Features a red lens manufactured from polycarbonate plastic.
6-Inch Oval Design: Common nominal size format for trailer rear-lighting installations.
9–36V DC Operation: Supports compatible electrical systems within the specified voltage range.
Standard 3-Pin PL-3 Connection: Uses the specified electrical connector configuration.
Grommet-Compatible Mounting: Designed for installation with an appropriate mounting grommet.
Utility and Equipment Trailer Applications: Intended for compatible trailer rear-lighting installations.
Stop, Tail, and Turn Functions
The Kaper II Oval LED Light combines three rear-lighting functions.
Stop Function: Provides red illumination when the trailer's braking circuit activates the stop-light function.
Tail Function: Provides red rear-lighting illumination when the trailer's tail-light circuit is activated.
Turn Function: Provides flashing red signaling when the applicable turn-signal circuit is activated.
Combining these functions in one assembly reduces the need for separate light housings for each function.
Electrical connections must be made according to the light's confirmed wiring requirements.
24 Red LED Diodes
The light contains 24 LED diodes.
These LEDs provide the light source for the combination stop, tail, and turn functions.
The exact diode arrangement, current draw, wattage, and measured luminous intensity have not been supplied.
The 24-diode specification provides a useful reference when comparing oval LED trailer lights.
Red Polycarbonate Lens
The light features a red polycarbonate lens.
Polycarbonate is a durable thermoplastic commonly used in vehicle lighting products.
The red lens provides the specified exterior lens color for the assembly.
Specific impact-resistance ratings, UV-resistance specifications, and lens-coating properties have not been verified.
9–36V DC Operating Range
The light is designed to operate between 9 and 36 volts DC.
This voltage range allows the product to be considered for compatible trailer electrical systems within the specified operating limits.
It may accommodate different nominal vehicle electrical systems, provided their actual operating voltage and wiring requirements are compatible.
The light should not be operated outside its specified voltage range.
Standard 3-Pin PL-3 Connection
The Kaper II Oval LED STT Light uses a standard 3-pin PL-3 electrical connection.
This connector configuration is used to connect the light to a compatible wiring harness or mating plug.
The required mating connector and wiring harness have not been confirmed as included.
Pin assignments and polarity should be verified before installation.
Grommet-Compatible Mounting
The light is designed for grommet mounting.
A compatible grommet provides the mounting interface between the light and the trailer's mounting opening.
The mounting grommet is sold separately.
Customers should verify the appropriate grommet, mounting-hole dimensions, and installation clearance before ordering.
Utility Trailer Applications
The light is intended for compatible utility trailer rear-lighting installations.
Its stop, tail, and turn functions provide the primary combination-light functions commonly required at the rear of trailers.
Compatibility depends on the trailer's electrical system, mounting opening, and applicable lighting requirements.
Specific trailer models have not been verified.
Equipment Trailer Applications
The light may also be used in compatible equipment trailer rear-lighting installations.
The oval configuration, grommet mounting design, and 9–36V DC operating range provide useful specifications for equipment trailer lighting selection.
The mounting arrangement and electrical connection must be confirmed for the intended trailer.
Nominal 6-Inch Oval Configuration
This product is identified as a nominal 6-inch oval LED light.
The supplied overall measurements are:
Length: 2.3"
Width: 6.4"
Height: 1.8"
These dimensions are preserved as supplied.
The 6-inch designation is a nominal catalog size and should not be treated as an exact overall measurement or mounting-hole specification.
The required mounting cutout and grommet dimensions have not been supplied.
Installation Considerations
Before installation, verify:
Trailer electrical system voltage
Correct PL-3 mating connector
Electrical pin assignments and polarity
Compatible mounting grommet
Mounting-hole size and available clearance
Appropriate wiring and circuit protection
Applicable vehicle lighting regulations
The grommet is sold separately.
No specific DOT, SAE, FMVSS 108, or other lighting compliance documentation has been supplied for this product.
Customers should verify regulatory suitability before using the light to satisfy required trailer lighting functions.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Product Type | Oval LED Stop/Tail/Turn Light |
| Nominal Size | 6" Oval |
| LED Count | 24 |
| Light Color | Red |
| Lens Color | Red |
| Lens Material | Polycarbonate |
| Lighting Functions | Stop / Tail / Turn |
| Operating Voltage | 9–36V DC |
| Electrical Connection | Standard 3-Pin PL-3 |
| Mounting Type | Grommet-Compatible |
| Grommet | Sold Separately |
| Length | 2.3" |
| Width | 6.4" |
| Height | 1.8" |
| Applications | Utility and Equipment Trailers |
The Kaper II Advantage
THREE FUNCTIONS. TWENTY-FOUR LEDs. ONE SMART FIT.
The Kaper II 6" Oval Red LED Stop/Tail/Turn Light combines essential trailer rear-lighting functions with a 24-diode LED configuration, red polycarbonate lens, and standard PL-3 connection.
Its 9–36V DC operating range and grommet-compatible design make it a versatile option for compatible utility and equipment trailer applications.
STOP. TAIL. TURN. ALL IN ONE.
