6" Oval Amber LED Rear Turn Signal Light – 10 Diodes
Dedicated Amber Turn Signaling. Ten LED Diodes. Surface-Mount Installation.
Give compatible commercial trucks, trailers, recreational vehicles, and specialty vehicles a dedicated rear turn-signal lighting solution with Kaper II's 6" Oval Amber LED Rear Turn Signal Light.
Featuring ten LED diodes, an oval lamp profile, surface-mount construction, and hardwired bare-end leads, this light is designed to perform a rear turn-signal function.
Unlike combination stop/tail/turn lamps, this model is identified as a turn-only light. This distinction is important when selecting lamps for vehicles with separate rear lighting functions.
Key Features & Benefits
6" Oval Design: Provides a recognizable oval lighting profile for compatible rear vehicle installations.
10 LED Diodes: Uses ten LED light sources to produce the specified amber turn-signal function.
Amber Turn Signal: Designed to communicate turning intentions through an amber rear signal.
Dedicated Turn-Only Function: Identified for turn signaling rather than combined stop, tail, and turn operation.
Surface-Mount Configuration: Designed for installation on a compatible mounting surface.
Hardwired Connection: Uses permanently attached wire leads rather than a specified plug-in connector.
Bare-End Leads: Provides unterminated wire ends for connection to a compatible vehicle wiring system.
Commercial Vehicle Applications: Suitable for consideration in compatible truck, trailer, RV, and specialty vehicle lighting systems.
LED Technology: Uses solid-state LED illumination rather than an incandescent filament.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Product Type | Rear Turn Signal Light |
| Lighting Function | Turn Only |
| Shape | Oval |
| Nominal Size | 6" |
| Light Technology | LED |
| LED Count | 10 |
| Emitted Light Color | Amber |
| Lens Color | Not specified |
| Mounting Style | Surface Mount |
| Wiring | Hardwired |
| Wire Termination | Bare-End Leads |
| Wire Count | Not specified |
| Operating Voltage | Not specified |
| Current Draw | Not specified |
| Housing Material | Not specified |
| Lens Material | Not specified |
| Overall Dimensions | Requires verification |
| Mounting Hardware | Not specified |
| DOT / SAE Compliance | Requires verification |
| Manufacturer SKU | Requires verification |
Dedicated Rear Turn Signal Function
This product is identified as a rear turn-only lamp.
Its purpose is to provide an amber signal when the vehicle's turn-signal circuit is activated.
This makes it distinct from combination rear lights that perform stop, tail, and turn functions within a single assembly.
For vehicle builders and replacement applications, identifying the correct lighting function helps ensure the selected lamp matches the intended wiring and lighting layout.
A dedicated turn-only lamp should not be advertised as a brake light or taillight unless those additional functions are independently documented.
Ten-Diode LED Design
The lamp features ten LED diodes.
LED lighting uses electronic light sources rather than the heated filament found in traditional incandescent bulbs.
This design offers a solid-state lighting solution for compatible vehicle electrical systems.
The diode count is a useful catalog distinction, especially when comparing visually similar oval LED lamps with different internal configurations.
Actual brightness, electrical consumption, and operating voltage should be confirmed from the manufacturer's technical specifications.
Amber Rear Turn Signal
The specified illumination color is amber.
Amber rear turn signals provide a visually distinct signaling function in vehicle lighting systems that use separate turn and stop lamps.
The source description identifies the light output as amber but does not establish whether the lamp has an amber lens or a clear lens with amber LEDs.
Lens color should therefore remain a separate, unverified catalog attribute.
Six-Inch Oval Profile
The lamp is described as a six-inch oval model.
Oval lamps are commonly used in commercial vehicle and trailer lighting installations.
However, nominal lamp size does not establish the exact overall dimensions, mounting-hole spacing, or required installation clearance.
These measurements should be checked against the product drawing before specifying replacement compatibility.
Surface-Mount Installation
The surface-mount design is intended for installation against a compatible vehicle mounting surface.
Surface mounting can be useful for applications where the vehicle's lighting arrangement calls for an externally mounted lamp assembly.
The exact mounting-hole pattern, fastener arrangement, and sealing requirements have not been provided.
Installation should follow the manufacturer's specified mounting procedure.
Hardwired Bare-End Leads
This lamp is identified as hardwired with bare-end leads.
The leads are intended for connection to the vehicle's compatible electrical circuit using an appropriate connection method.
Unlike a lamp supplied with a specified molded plug, bare-end wiring requires the installer to make the electrical connections.
The wire count, color coding, polarity, and grounding method must be verified before installation.
Connections should be secured and protected against moisture, vibration, and mechanical damage.
Potential Applications
Commercial Trucks: Dedicated rear amber turn signaling for compatible truck lighting configurations.
Trailers: A potential rear turn-signal lamp for trailers using separate amber turn indicators.
RVs and Motorhomes: Replacement or OEM lighting for compatible recreational vehicle electrical systems.
Specialty Vehicles: Rear signal lighting for compatible utility, service, and custom-built vehicles.
OEM Vehicle Manufacturing: A potential component for vehicle builders specifying dedicated rear turn-signal circuits.
Installation Considerations
Before installation, verify the vehicle's electrical voltage, wiring configuration, mounting dimensions, and required lighting functions.
Confirm the lamp's wire assignments and grounding method before connecting it to the vehicle.
If replacing an incandescent turn signal with an LED lamp, verify compatibility with the vehicle's turn-signal control system. Some systems may require additional measures to prevent incorrect flash behavior or lamp-out indications.
Check the applicable vehicle lighting requirements and confirm that the lamp carries the necessary compliance markings for the intended installation.
Important: The supplied description establishes the six-inch oval profile, amber turn-only function, ten LED diodes, surface-mount configuration, and hardwired bare-end leads. Voltage, wire count, lens color, exact dimensions, mounting hardware, and regulatory certifications require verification.
