24" Red LED Emergency Warning Light Bar – 12V, D-Fuser Optics, Permanent Mount

Enhance vehicle warning visibility with the Kaper II 24" Red LED Emergency Warning Light Bar. Designed for compatible emergency response and service/utility applications, this 12V light bar features flashing red illumination and diffused D-Fuser optics with six LEDs per module. A single flashing pattern provides a defined warning-light function, while the polycarbonate lens and included permanent-mount feet with hardware support installation on suitable vehicle mounting surfaces. The 24-inch nominal length offers a practical warning-light configuration for vehicles requiring red emergency lighting where permitted by applicable regulations.

Sku: L03-0098
focuspoint.productsaleshistory.orderfocuspoint.productsaleshistory.quantityfocuspoint.productsaleshistory.ordercreateddate
focuspoint.productsaleshistory.noproductsaleshistory
Disponibilidad:
Precio: Convocatoria de precios
i h h

24" Red LED Emergency Warning Light Bar – 12V, D-Fuser Optics, Permanent Mount

MAKE THE WARNING CLEAR. MAKE EVERY FLASH COUNT.

Equip compatible emergency response and service vehicles with the Kaper II 24-Inch Red LED Emergency Warning Light Bar.

Featuring flashing red illumination and diffused D-Fuser optical technology, this 12V warning light bar provides a dedicated visual warning-light function for authorized applications.

Each D-Fuser module contains six LEDs, using diffused optics to distribute the module's red warning illumination.

The light bar features a single flashing pattern, polycarbonate lens construction, and standard permanent-mount feet with mounting hardware.

Its nominal 24-inch length provides a defined light-bar size for installation planning on compatible vehicles.

Key Features & Benefits

  • 24-Inch Light Bar: Nominal length provides a defined warning-light configuration.

  • Flashing Red LEDs: Delivers red visual warning illumination.

  • D-Fuser Optical Design: Diffused LED optics distribute light from the warning-light modules.

  • Six LEDs per Module: Each D-Fuser module contains six LEDs.

  • Single Flash Pattern: Provides one specified flashing warning-light function.

  • 12V Operation: Designed for compatible 12V electrical systems.

  • Polycarbonate Lens: Provides the specified lens material for the lighting assembly.

  • Permanent-Mount Feet: Standard mounting feet and hardware are included.

  • Emergency Response Applications: Intended for compatible authorized emergency vehicle warning-light installations.

  • Service and Utility Applications: May be used where flashing red warning lights are legally permitted.

24-Inch Emergency Warning Light Bar

The Kaper II Emergency LED Warning Light Bar has a nominal length of 24 inches.

This configuration provides a compact warning-light bar format for compatible vehicle installations.

The overall width, height, and mounting-foot dimensions have not been provided.

Customers should confirm available mounting clearance before installation.

Red Flashing Warning Illumination

The light bar produces flashing red warning illumination.

Red warning lights are commonly associated with designated emergency response functions, although permitted applications vary by jurisdiction.

This product should be installed and operated only where its red warning-light function is legally authorized.

The product's light output, flash rate, and measured warning-light intensity have not been supplied.

D-Fuser Diffused LED Optics

The light bar features D-Fuser optical technology.

The confirmed configuration uses diffused LED warning-light optics.

Diffused optics distribute illumination from the LEDs through the module's optical assembly.

This distinguishes the D-Fuser design from lighting products that use narrowly focused spot optics.

The exact optical distribution, viewing angles, and measured intensity have not been verified.

Six LEDs per D-Fuser Module

Each D-Fuser module contains six LEDs.

This is a module-level specification rather than the total LED count for the complete light bar.

The number of D-Fuser modules installed in the 24-inch assembly has not been confirmed.

Accordingly, the total number of LEDs should not be calculated or advertised until the module count is verified.

Single Flash Pattern

The light bar features one flashing pattern.

This provides a defined flashing red warning-light function.

The specific flash sequence, flashes per minute, synchronization capability, and operating controls have not been provided.

No additional selectable flash patterns should be advertised for this model.

12V Electrical Operation

The Kaper II warning light bar is specified for 12V operation.

It is intended for compatible 12V vehicle electrical systems.

Current draw, power consumption, voltage tolerance, circuit protection, and wiring configuration have not been supplied.

Installers should verify the electrical requirements before connecting the light bar.

Polycarbonate Lens

The light bar uses a polycarbonate lens.

Polycarbonate is a durable thermoplastic commonly used in vehicle lighting assemblies.

The material provides the specified lens construction for the warning light.

Specific impact ratings, UV-resistance specifications, and environmental protection ratings have not been verified.

Permanent-Mount Feet and Hardware

The light bar includes standard permanent-mount feet with hardware.

This configuration is intended for installation on a compatible vehicle mounting surface.

The mounting-foot dimensions, hole spacing, fastener specifications, and required installation procedures have not been provided.

Customers should verify the mounting arrangement and vehicle suitability before installation.

Emergency Response Vehicle Applications

The light bar is intended for compatible emergency response vehicle warning-light applications.

Its flashing red illumination may be appropriate for vehicles authorized to use red emergency warning lights.

Vehicle-specific fitment and regulatory authorization have not been established.

Installation and use must comply with applicable laws and vehicle equipment requirements.

Service and Utility Vehicle Applications

The light bar may also be considered for service and utility vehicles where flashing red warning lights are specifically permitted.

Red lighting is not universally authorized for general service, maintenance, or utility vehicles.

Customers should verify local and state requirements before selecting this product for a non-emergency vehicle.

Installation Considerations

Before installing the warning light bar, confirm:

  • Compatible 12V electrical system

  • Authorization to use flashing red warning lights

  • Available mounting surface and clearance

  • Permanent-mount foot and hardware compatibility

  • Electrical connection and circuit protection requirements

  • Applicable warning-light regulations

The light bar should not be represented as meeting specific SAE, ECE, DOT, or other certification requirements without supporting documentation.

Product Specifications

SpecificationDetails
ManufacturerKaper II
Product TypeEmergency LED Warning Light Bar
Nominal Length24"
Operating Voltage12V
Warning ColorRed
Operating FunctionFlashing
Optical TechnologyD-Fuser
Optical ConfigurationDiffused
LEDs per Module6
Total Module CountNot Verified
Total LED CountNot Verified
Flash Patterns1
Lens MaterialPolycarbonate
Housing MaterialNot Verified
MountingPermanent-Mount Feet
Mounting HardwareIncluded
ApplicationsAuthorized Emergency Response and Service / Utility Warning Lighting

The Kaper II Advantage

A CLEAR SIGNAL WHEN VISIBILITY MATTERS.

The Kaper II 24" Red LED Emergency Warning Light Bar combines diffused D-Fuser optics, flashing red illumination, and a permanent-mount configuration.

With six LEDs per D-Fuser module, a single flash pattern, and 12V operation, it provides a dedicated warning-light option for compatible authorized emergency response and service/utility installations.

ONE PURPOSE. ONE CLEAR WARNING.

*
*
*