22.5" × 8.25" Rear Wheel Simulator Set – 10-Lug, 5 Hand Holes, 33mm Lug Nut Covers
Heavy-Duty Wheel Styling. Ten-Lug Compatibility. Professional Rear Wheel Appearance.
Upgrade your commercial truck's appearance with Kaper II's 22.5" × 8.25" Rear Wheel Simulator Set.
Designed for compatible ten-lug rear wheel assemblies, this simulator set features an 11.25-inch bolt circle, five-hand-hole design, and 33mm lug nut covers.
The 22.5-inch wheel diameter and 8.25-inch wheel width provide essential dimensional specifications for identifying compatible heavy-duty wheel assemblies.
Its five-hand-hole configuration delivers a recognizable commercial truck wheel appearance, while the specified 33mm lug nut covers help create a coordinated look around the wheel's lug area.
Whether maintaining a commercial fleet, upgrading a work truck, or refreshing a compatible specialty vehicle, Kaper II wheel simulators offer a practical way to enhance the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
22.5" Wheel Diameter: Designed for qualifying heavy-duty commercial wheel assemblies.
8.25" Wheel Width: Matches the specified wheel width configuration.
Rear Axle Application: Specifically designated for rear wheel simulator installations.
10-Lug Configuration: Intended for compatible ten-lug wheel assemblies.
11.25" Bolt Circle: Provides an important wheel fitment specification.
5-Hand-Hole Design: Features five openings for a distinctive commercial truck appearance.
33mm Lug Nut Covers: Identified with covers for the specified lug nut size.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Professional Fleet Styling: Complements qualifying commercial trucks and work vehicles.
Heavy-Duty Appearance: Provides a coordinated wheel presentation for compatible rear wheel assemblies.
Product Specifications
| Specification | Details |
|---|
| Product Type | Rear Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 22.5" |
| Wheel Width | 8.25" |
| Wheel Position | Rear |
| Axle Application | Rear Axle |
| Lug Configuration | 10-Lug |
| Bolt Circle Diameter | 11.25" |
| Metric Bolt Circle Equivalent | 285.75mm |
| Bolt Pattern | 10 × 11.25" |
| Hand-Hole Configuration | 5 Hand Holes |
| Lug Nut Cover Size | 33mm |
| Lug Nut Cover Style | Not specified |
| Wheel Stud Thread Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Center Cap Configuration | Not specified |
| Mounting / Retention Method | Not specified |
| Single / Dual Rear Wheel Compatibility | Not confirmed |
| Vehicle Make / Model | Not specified |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Heavy-Duty Commercial Trucks
Designed for consideration on compatible commercial trucks equipped with 22.5" × 8.25" ten-lug rear wheel assemblies featuring an 11.25-inch bolt circle.
Commercial Fleet Vehicles
An appearance upgrade for qualifying fleet trucks requiring the specified rear wheel configuration.
Vocational & Work Trucks
May be suitable for compatible service trucks, utility vehicles, and other heavy-duty work truck applications.
Box Trucks & Specialty Vehicles
May be suitable for qualifying commercial box trucks and specialty vehicles equipped with matching rear wheel assemblies.
Motorhome & RV Chassis
May be suitable for qualifying heavy-duty motorhome or RV chassis using compatible 22.5-inch rear wheels.
These are potential application categories rather than confirmed vehicle fitments. Customers should verify the original wheel dimensions, bolt pattern, lug nut specifications, and mounting requirements before purchase.
22.5" × 8.25" Wheel Compatibility
The 22.5-inch wheel diameter and 8.25-inch wheel width are essential fitment specifications.
Commercial wheel assemblies may vary in profile, offset, center opening, and mounting requirements even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a rear wheel simulator.
Ten-Lug, 11.25-Inch Bolt Circle
This wheel simulator set is identified for ten-lug wheel assemblies featuring an 11.25-inch bolt circle.
The bolt circle is the diameter of the circle passing through the centers of the wheel's ten mounting positions.
An 11.25-inch bolt circle is equivalent to 285.75 millimeters.
This configuration may be expressed as 10 × 11.25".
Customers should verify the original wheel's bolt pattern before ordering, as not all ten-lug wheels use the same bolt-circle diameter.
Five-Hand-Hole Design
The five-hand-hole configuration provides a recognizable heavy-duty commercial truck wheel appearance.
This design distinguishes the simulator from models featuring two or other hand-hole configurations.
Hand-hole count should be included in website specifications and product filters to help customers identify the correct simulator.
33mm Lug Nut Covers
This model is identified with 33mm lug nut covers.
Lug nut covers help provide a coordinated appearance around the wheel's lug area.
The 33mm designation should be verified against the original lug nut dimensions and the manufacturer's cover specifications before installation.
The supplied description does not establish the cover material, shape, finish, retention method, or exact quantity.
Rear Wheel Application
This simulator set is specifically identified for rear axle wheel installations.
Front and rear commercial wheel assemblies may differ in profile, offset, hub clearance, and mounting requirements.
Customers should confirm that the simulator is compatible with the vehicle's original rear wheel configuration.
The supplied description does not establish whether the product is intended for single-rear-wheel or dual-rear-wheel applications.
Commercial Fleet & Work Truck Styling
Rear wheel simulators provide a practical way to refresh the appearance of existing commercial-duty wheels without replacing the original assemblies.
The combination of a five-hand-hole design and 33mm lug nut covers creates a coordinated appearance for qualifying heavy-duty rear wheel applications.
A consistent wheel appearance can complement vehicle branding, fleet maintenance, and commercial transportation applications.
Installation Recommendations
Before installation, verify:
22.5-inch wheel diameter.
8.25-inch wheel width.
Ten-lug configuration.
11.25-inch bolt circle.
Five-hand-hole wheel design.
Compatibility with the specified 33mm lug nut covers.
Rear wheel profile and hub clearance.
Valve-stem access.
Required mounting and retention hardware.
Confirm the vehicle's exact rear wheel configuration and follow Kaper II's installation instructions.
Do not substitute unspecified mounting hardware or modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish material, finish, center cap configuration, mounting method, exact vehicle applications, single- or dual-rear-wheel compatibility, or complete package contents. These details should be verified before publication.
