22.5" × 6.75" Maxion Rear Wheel Simulator Set – 8-Lug, 275mm Bolt Circle
Heavy-Duty Wheel Styling. Maxion Wheel Compatibility. Professional Fleet Appearance.
Upgrade your commercial truck's appearance with Kaper II's 22.5" × 6.75" Maxion Rear Wheel Simulator Set.
Designed for compatible Maxion rear wheel assemblies, this simulator set features an eight-lug configuration and a 275mm bolt circle.
The 22.5-inch wheel diameter and 6.75-inch wheel width provide important dimensional specifications for identifying compatible commercial-duty wheel assemblies.
Its eight-lug configuration and specified bolt-circle diameter help distinguish this model from wheel simulators intended for other heavy-duty wheel patterns.
Whether maintaining a commercial fleet, upgrading a work truck, or refreshing a compatible specialty vehicle, Kaper II wheel simulators offer a practical way to enhance the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
22.5" Wheel Diameter: Designed for qualifying commercial-duty wheel assemblies.
6.75" Wheel Width: Matches the specified wheel width configuration.
Maxion Wheel Application: Intended for compatible Maxion wheel assemblies.
Rear Wheel Design: Specifically designated for rear axle wheel simulator installations.
8-Lug Configuration: Designed for compatible eight-lug wheel assemblies.
275mm Bolt Circle: Identifies an important wheel fitment specification.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Commercial Fleet Styling: Complements qualifying work trucks and fleet vehicles.
Professional Appearance: Provides a coordinated look for compatible commercial-duty vehicles.
Heavy-Duty Vehicle Applications: Suitable for consideration on qualifying trucks and specialty vehicles equipped with matching Maxion wheels.
Product Specifications
| Specification | Details |
|---|
| Product Type | Rear Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 22.5" |
| Wheel Width | 6.75" |
| Wheel Manufacturer Application | Maxion |
| Wheel Position | Rear |
| Axle Application | Rear Axle |
| Lug Configuration | 8-Lug |
| Bolt Circle Diameter | 275mm |
| Hand-Hole Configuration | Not specified |
| Wheel Stud Thread Size | Not specified |
| Lug Nut Hex Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Center Cap Configuration | Not specified |
| Mounting / Retention Method | Not specified |
| Single / Dual Rear Wheel Compatibility | Not confirmed |
| Exact Maxion Wheel Part Numbers | Not confirmed |
| Vehicle Make / Model | Not specified |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Maxion Commercial Truck Wheels
Designed for consideration on compatible Maxion 22.5" × 6.75" rear wheel assemblies featuring an eight-lug configuration and 275mm bolt circle.
Heavy-Duty Commercial Trucks
May be suitable for qualifying commercial trucks equipped with matching Maxion rear wheel assemblies.
Commercial Fleet Vehicles
An appearance upgrade for compatible fleet trucks requiring the specified rear wheel configuration.
Specialty Commercial Vehicles
May be suitable for qualifying box trucks, vocational vehicles, and specialty commercial builds using compatible Maxion wheel assemblies.
Motorhome and RV Chassis Applications
May be suitable for qualifying heavy-duty motorhome or RV chassis equipped with matching Maxion rear wheels. Vehicle-specific fitment must be confirmed.
Exact vehicle model, chassis, rear wheel arrangement, wheel profile, hub clearance, and mounting compatibility should be verified before purchase.
Maxion Rear Wheel Compatibility
This simulator set is specifically identified for compatible Maxion rear wheel applications.
Maxion produces multiple commercial wheel configurations, and the manufacturer name alone does not establish compatibility with every Maxion wheel.
Customers should verify the original wheel's diameter, width, lug count, bolt circle, profile, and mounting requirements.
The exact Maxion wheel part numbers supported by this simulator have not been supplied.
22.5" × 6.75" Wheel Design
The 22.5-inch diameter and 6.75-inch width are essential fitment specifications.
Commercial-duty wheels can vary in profile, offset, center opening, and mounting arrangement even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a rear wheel simulator.
Eight-Lug Wheel Configuration
This wheel simulator set is identified for compatible eight-lug rear wheel assemblies.
Lug count is an important fitment consideration, but it must be evaluated alongside the bolt-circle diameter and other wheel specifications.
Not all eight-lug commercial wheels use the same bolt pattern or mounting configuration.
275mm Bolt Circle
The 275mm bolt-circle specification identifies the diameter of the circle passing through the centers of the eight wheel mounting positions.
This measurement is commonly referred to as the bolt-circle diameter or pitch-circle diameter.
It should not be confused with wheel diameter, center bore, or lug nut hex size.
Customers should verify that their original Maxion wheel uses the specified 275mm bolt circle before ordering.
Rear Wheel Application
This simulator set is specifically identified for rear axle wheel installations.
Front and rear commercial wheel assemblies may differ in profile, offset, hub clearance, and mounting requirements.
Customers should confirm that the simulator is compatible with the vehicle's original rear wheel configuration.
The supplied designation does not establish whether this model is intended for single-rear-wheel or dual-rear-wheel applications.
Commercial Fleet & Work Truck Styling
Rear wheel simulators provide a practical way to refresh the appearance of existing commercial-duty wheels without replacing the original assemblies.
A coordinated wheel appearance can complement vehicle branding, fleet maintenance, and commercial transportation applications.
Installation Recommendations
Before installation, verify the rear wheel diameter, 6.75-inch wheel width, eight-lug configuration, 275mm bolt circle, Maxion wheel profile, hub clearance, valve-stem access, and mounting requirements.
Confirm whether the vehicle uses a single- or dual-rear-wheel arrangement and whether the simulator is approved for that configuration.
Verify the exact Maxion wheel part number and vehicle application whenever possible.
Follow Kaper II's installation instructions and applicable wheel safety requirements.
Do not substitute unspecified mounting hardware or modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish the hand-hole count, wheel stud thread size, lug nut hex size, material, finish, mounting method, center cap configuration, single- or dual-rear-wheel compatibility, specific Maxion wheel part numbers, or package contents. These details should be verified before publication.
