19.5" × 6" Ford F-450/F-550 XL Super Duty Rear Wheel Simulator Set – 10-Lug
Heavy-Duty Ford Styling. Professional Fleet Appearance. Rear Wheel Compatibility.
Upgrade the appearance of your Ford F-450 or F-550 XL Super Duty with Kaper II's 19.5" × 6" Rear Wheel Simulator Set.
Designed for compatible Ford F-450 and F-550 XL Super Duty rear wheel assemblies, this simulator set features a 10-lug configuration, five-hand-hole design, and a 2005–Current application designation.
The 19.5-inch wheel diameter and 6-inch wheel width provide important dimensional specifications for identifying compatible commercial-duty wheel assemblies.
Its five-hand-hole configuration delivers a distinctive heavy-duty truck appearance, while the 10-lug design distinguishes this model from eight-lug Ford Super Duty wheel simulator applications.
Whether maintaining a commercial fleet, upgrading a work truck, or refreshing a compatible specialty vehicle, Kaper II wheel simulators offer a practical way to enhance the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
19.5" Wheel Diameter: Designed for qualifying commercial-duty wheel assemblies.
6" Wheel Width: Matches the specified wheel width configuration.
Ford F-450/F-550 Application: Intended for compatible Ford Super Duty truck wheels.
XL Super Duty Designation: Identified for the Ford XL Super Duty application.
Rear Wheel Design: Specifically designated for rear axle wheel simulator installations.
10-Lug Configuration: Designed for compatible ten-lug wheel assemblies.
5-Hand-Hole Design: Features five openings for a distinctive commercial truck appearance.
2005–Current Application: Identified for the specified Ford Super Duty model-year range, subject to fitment verification.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Commercial Fleet Styling: Complements qualifying work trucks and fleet vehicles.
Product Specifications
| Specification | Details |
|---|
| Product Type | Rear Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 19.5" |
| Wheel Width | 6" |
| Vehicle Make | Ford |
| Vehicle Models | F-450 / F-550 |
| Vehicle Series | XL Super Duty |
| Specified Model Years | 2005–Current |
| Wheel Position | Rear |
| Axle Application | Rear Axle |
| Lug Configuration | 10-Lug |
| Hand-Hole Configuration | 5 Hand Holes |
| Bolt Circle Diameter | Not specified |
| Wheel Stud Thread Size | Not specified |
| Lug Nut Hex Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Center Cap Configuration | Not specified |
| Mounting / Retention Method | Not specified |
| Single / Dual Rear Wheel Compatibility | Not confirmed |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Ford F-450 XL Super Duty
Designed for consideration on compatible Ford F-450 XL Super Duty trucks equipped with matching 19.5" × 6" ten-lug rear wheel assemblies.
Ford F-550 XL Super Duty
Intended for qualifying Ford F-550 XL Super Duty applications using the specified rear wheel configuration.
Commercial Fleet Vehicles
An appearance upgrade for compatible commercial-duty Ford fleet trucks requiring 19.5-inch rear wheel simulators.
Ford-Based Specialty Vehicles
May be suitable for qualifying service bodies, utility trucks, flatbeds, and specialty commercial vehicles built on compatible Ford F-450 or F-550 chassis.
Model-Year Application
The supplied product designation identifies 2005–Current applications. Compatibility across individual model years, wheel designs, and chassis configurations should be verified before purchase.
Ford F-450/F-550 Rear Wheel Compatibility
This simulator set is specifically identified for Ford F-450 and F-550 XL Super Duty rear wheel applications.
Front and rear wheel assemblies may differ in wheel profile, offset, hub clearance, and mounting requirements.
Customers should confirm that the simulator is compatible with their original rear wheel configuration.
The supplied designation does not establish whether this product is intended for single-rear-wheel or dual-rear-wheel configurations.
19.5" × 6" Wheel Design
The 19.5-inch diameter and 6-inch width are essential fitment specifications.
Commercial-duty wheels may vary in profile, offset, center opening, and mounting arrangement even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a rear wheel simulator.
Heavy-Duty 10-Lug Configuration
This wheel simulator set is identified for compatible ten-lug rear wheel assemblies.
The 10-lug configuration is an important distinction from Ford Super Duty wheel simulators designed for eight-lug applications.
However, lug count alone does not establish compatibility.
Ten-lug wheels can use different bolt-circle diameters, wheel profiles, stud specifications, and mounting arrangements.
Customers should verify the complete wheel configuration before installation.
Distinctive Five-Hand-Hole Design
The five-hand-hole configuration provides a recognizable commercial truck wheel appearance.
This design distinguishes the simulator from wheel covers featuring four, eight, or other hand-hole configurations.
Hand-hole count should be included in website specifications and product filters to help customers identify the correct simulator.
Ford XL Super Duty Application
This model carries a Ford XL Super Duty designation for F-450 and F-550 applications.
Because wheel equipment may vary by chassis, production year, and vehicle configuration, customers should verify their original wheel specifications before ordering.
The XL designation should not be interpreted as confirmation of compatibility with every F-450 or F-550 trim or chassis variation.
Commercial Fleet & Work Truck Styling
Rear wheel simulators provide a practical way to refresh the appearance of existing commercial-duty Ford wheels without replacing the original assemblies.
A coordinated wheel appearance can complement fleet branding, vehicle maintenance, and commercial transportation applications.
Installation Recommendations
Before installation, verify the rear wheel diameter, 6-inch wheel width, ten-lug configuration, five-hand-hole design, bolt-circle diameter, wheel profile, hub clearance, valve-stem access, and mounting requirements.
Confirm the exact Ford model, production year, and rear wheel configuration.
Follow Kaper II's installation instructions and applicable wheel safety requirements.
Do not substitute unspecified mounting hardware or modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish the bolt-circle diameter, wheel stud thread size, lug nut hex size, material, finish, mounting method, center cap configuration, single- or dual-rear-wheel compatibility, or exact package contents. These details should be verified before publication.
