19.5" Rear Axle Cover – Chrome-Plated Steel, 6-Lug, 8.75" Bolt Circle
A POLISHED FINISH FOR THE RIGHT WHEEL FIT.
Maintain a clean, professional rear wheel appearance with the Kaper II 19.5" Rear Axle Cover, designed for compatible unitized steel wheel applications.
Manufactured from chrome-plated steel, this individual rear axle cover features a bright exterior finish, over-the-lug attachment configuration, and a solid, non-removable center.
Designed for 19.5-inch wheels with a 6-lug configuration and 8.75-inch bolt circle, the cover provides a dedicated replacement option for vehicles equipped with the corresponding wheel arrangement.
With overall dimensions of 11.2 inches long, 11.2 inches wide, and 6.6 inches high, this rear axle cover can be selected using its defined wheel specifications and physical dimensions.
Key Features & Benefits
Chrome-Plated Steel Construction: Combines steel construction with a reflective chrome-plated exterior finish.
19.5" Wheel Application: Designed for compatible 19.5-inch unitized steel wheels.
6-Lug Configuration: Intended for wheel assemblies featuring six lug positions.
8.75" Bolt Circle: Identified for the specified wheel bolt-circle configuration.
Over-the-Lug Attachment: Uses an over-the-lug mounting arrangement.
Solid Center Design: Features a fixed center without a removable pop-out cap.
Rear Wheel Position: Specifically intended for rear axle cover applications.
Individual Replacement Component: Sold as one rear axle cover rather than a complete simulator set.
Defined Dimensions: Measures 11.2" L × 11.2" W × 6.6" H.
Multiple Vehicle Applications: Suitable for different vehicle types where wheel fitment requirements are met.
Chrome-Plated Steel Construction
The Kaper II Rear Axle Cover is manufactured from steel with a chrome-plated finish.
Its reflective exterior helps create a polished appearance around the rear wheel assembly, complementing other chrome-finished vehicle accessories.
The chrome plating provides the visible exterior finish, while steel serves as the underlying construction material.
This product should be distinguished from stainless steel axle covers, as its verified construction is chrome-plated steel.
Designed for 19.5" Unitized Steel Wheels
This rear axle cover is identified for compatible 19.5-inch unitized steel wheel applications.
The wheel configuration includes six lug positions and an 8.75-inch bolt circle.
These specifications are important when selecting the correct replacement axle cover.
The 19.5-inch measurement describes the wheel diameter rather than the physical diameter of the axle cover.
Likewise, the 8.75-inch bolt-circle measurement identifies the wheel's lug pattern rather than the outside dimensions of the cover.
Customers should verify all relevant wheel and mounting specifications before ordering.
Over-the-Lug Attachment Configuration
The axle cover uses an over-the-lug attachment design.
This configuration is intended for compatible wheel assemblies and should not be confused with other axle cover attachment methods.
The specific retention components, installation procedure, and mounting hardware requirements have not been confirmed.
Installers should follow the applicable product instructions and verify that the existing wheel arrangement supports the required over-the-lug attachment.
Solid, Non-Removable Center
Unlike axle covers featuring removable pop-out center caps, this rear cover has a solid center.
There is no separate A-17 or other removable center cap included with this product.
The fixed-center configuration is an important distinction when identifying replacement parts.
Customers requiring a removable center design should select a different axle cover specifically identified for that feature.
Rear Axle Cover Dimensions
The cover measures:
Length: 11.2 inches
Width: 11.2 inches
Height: 6.6 inches
These measurements describe the individual axle cover and should not be confused with the 19.5-inch wheel diameter or 8.75-inch bolt circle.
The dimensions can assist customers in comparing the replacement cover against their existing component.
Individual Rear Replacement Cover
This product is supplied as one individual rear axle cover.
It is not a complete wheel simulator set and does not include a separately removable center cap.
For customers maintaining compatible wheel assemblies, an individual replacement cover provides an option for replacing the specific rear component.
This can be useful when the remaining wheel accessories are still serviceable.
Multiple Vehicle Applications
The rear axle cover may be suitable for multiple vehicle types based on wheel fitment.
Vehicle compatibility must be established by the wheel configuration rather than vehicle category alone.
The following specifications should be confirmed:
19.5-inch wheel diameter
6-lug wheel configuration
8.75-inch bolt circle
Unitized steel wheel application
Compatible over-the-lug mounting arrangement
Appropriate cover dimensions and clearances
No specific vehicle makes, models, or production years have been verified for this product.
Maintaining a Coordinated Wheel Appearance
Axle covers are visible components of a vehicle's wheel assembly.
When an existing rear axle cover is missing, damaged, or requires replacement, a correctly matched replacement helps maintain a consistent exterior appearance.
The chrome-plated finish of this Kaper II cover provides a polished appearance for compatible rear wheel installations.
Because the cover is sold individually, customers can source the required rear component without automatically purchasing a complete simulator kit.
Product Specifications
| Specification | Details |
|---|
| Manufacturer | Kaper II |
| Product Type | Rear Axle Cover |
| Wheel Position | Rear |
| Wheel Diameter | 19.5" |
| Wheel Application | Unitized Steel Wheel |
| Lug Configuration | 6-Lug |
| Bolt Circle | 8.75" |
| Axle Cover Material | Steel |
| Finish | Chrome-Plated |
| Attachment Type | Over-the-Lug |
| Center Design | Solid / Non-Removable |
| Pop-Out Center Included | No |
| Length | 11.2" |
| Width | 11.2" |
| Height | 6.6" |
| Package Configuration | One Individual Rear Axle Cover |
| Vehicle Applications | Multiple Types Based on Wheel Fitment |
| Mounting Hardware Included | Not Confirmed |
Product Selection & Installation Considerations
Before ordering, confirm the vehicle is equipped with the required 19.5-inch unitized steel wheel configuration.
Verify the six-lug arrangement and 8.75-inch bolt circle.
Check that the existing wheel assembly supports the cover's over-the-lug attachment method.
Compare the existing cover dimensions with the specified 11.2" × 11.2" × 6.6" measurements.
This is a rear axle cover with a solid center. It should not be substituted for a front axle cover or a removable-center assembly without confirmed compatibility.
Mounting hardware inclusion and specific installation procedures have not been verified.
The Kaper II Advantage
REPLACE THE COVER. RESTORE THE POLISHED LOOK.
The Kaper II 19.5" Rear Axle Cover provides an individual replacement solution for compatible 6-lug unitized steel wheel applications.
With its chrome-plated steel construction, over-the-lug attachment configuration, solid center, and defined dimensions, this rear cover offers a practical replacement option for maintaining a coordinated wheel appearance.
BUILT FOR THE WHEEL. FINISHED FOR THE ROAD.