19.5" × 6" Ram ABS Chrome Rear Wheel Simulator Set
Bold Chrome Styling. Distinctive Spike Details. Built for the Working Road.
Give your Ram truck a commanding appearance with Kaper II's 19.5" × 6" ABS Chrome Rear Wheel Simulator Set.
Designed for compatible Ram rear wheel applications from the 2012 model year onward, this simulator set combines chrome-finished ABS construction with a 10-lug configuration, 225mm bolt circle, and five-hand-hole design.
What sets this model apart is its combination of pop-out caps and distinctive spike-style lug nut covers, providing an aggressive, customized appearance that complements heavy-duty commercial trucks and specialty vehicles.
The chrome finish delivers a bright, polished appearance, while ABS construction offers a lightweight alternative to traditional metal wheel simulators.
Specifically designated as a rear set, this product is intended for compatible rear wheel assemblies rather than interchangeable front wheel applications.
Whether refreshing a commercial work truck, maintaining a fleet vehicle, or upgrading a specialty Ram chassis, Kaper II wheel simulators provide an attractive way to enhance existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
19.5" × 6" Wheel Compatibility: Designed for qualifying Ram rear wheels matching the specified dimensions.
Ram Truck Application: Identified for compatible Ram wheel configurations.
Rear Wheel Design: Specifically designated for rear wheel simulator applications.
2012 & Newer Designation: Listed for qualifying vehicles beginning with the 2012 model year.
ABS Construction: Uses molded ABS plastic rather than traditional metal simulator construction.
Chrome Finish: Provides a bright, polished wheel appearance.
10-Lug Configuration: Intended for matching ten-lug wheel assemblies.
225mm Bolt Circle: Features the specified 10 × 225mm bolt pattern.
5-Hand-Hole Design: Provides a traditional heavy-duty commercial wheel appearance.
Pop-Out Caps: Incorporates removable cap components.
Spike Lug Nut Covers: Adds distinctive pointed styling around the wheel's lug nut positions.
Existing Wheel Upgrade: Enhances rear wheel appearance without replacing the original wheels.
Product Specifications
| Specification | Details |
|---|
| Product Type | Rear Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 19.5" |
| Wheel Width | 6" |
| Material | ABS Plastic |
| Finish | Chrome |
| Vehicle Manufacturer | Ram |
| Vehicle Applications | Compatible Ram Truck Chassis |
| Listed Model Years | 2012 & Up |
| Wheel Position | Rear |
| Lug Configuration | 10-Lug |
| Bolt Pattern | 10 × 225mm |
| Bolt Circle Diameter | 225mm / approximately 8.86" |
| Hand-Hole Configuration | 5 Hand Holes |
| Cap Style | Pop-Out Caps |
| Lug Nut Cover Style | Spike |
| Vehicle Segment | Commercial Truck / Specialty Vehicle |
| Mounting / Retention Method | Not specified |
| Single / Dual Rear Wheel Compatibility | Not confirmed |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Ram Commercial Trucks
Identified for qualifying Ram trucks from the 2012 model year onward equipped with compatible 19.5" × 6" ten-lug rear wheels featuring a 225mm bolt circle.
Ram Chassis Cab Applications
May be suitable for qualifying Ram chassis cab vehicles using the specified rear wheel configuration.
Commercial Work Trucks
An appearance upgrade for compatible Ram work trucks, including service vehicles, utility trucks, and commercial chassis applications.
Specialty Commercial Vehicles
An option for qualifying utility bodies, flatbed trucks, and other specialty vehicles built on compatible Ram chassis.
Commercial Fleet Applications
Provides an attractive rear wheel appearance upgrade for qualifying Ram fleet vehicles.
Exact Ram model, chassis configuration, model year, and wheel compatibility must be verified before purchase.
Ram Rear Wheel Compatibility
This simulator set is specifically identified for rear wheel applications.
Front and rear wheel assemblies can differ in profile, offset, hub clearance, and mounting requirements.
Customers should confirm that the simulator is compatible with their vehicle's original rear wheel configuration.
The supplied designation does not establish whether this model is intended for single-rear-wheel or dual-rear-wheel configurations.
Chrome-Finished ABS Construction
This wheel simulator set uses ABS plastic with a chrome finish.
ABS construction provides a lightweight alternative to traditional stainless steel and other metal wheel simulator designs.
The chrome appearance complements commercial trucks, work vehicles, and specialty chassis applications.
Customers should distinguish chrome-finished ABS from stainless steel when comparing wheel simulator materials.
19.5" × 6" Wheel Design
The 19.5-inch diameter and 6-inch width are essential fitment specifications.
Commercial vehicle wheels may vary in profile, offset, center opening, and mounting arrangement even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a rear wheel simulator.
10 × 225mm Bolt Pattern
The ten-lug, 225mm bolt circle is a defining compatibility requirement.
Not all Ram truck wheels use this bolt pattern.
Customers should confirm the original wheel's complete bolt-circle dimensions and configuration rather than relying solely on the vehicle manufacturer or lug count.
Distinctive Five-Hand-Hole Design
The five-hand-hole configuration provides a recognizable commercial truck wheel appearance.
This design also distinguishes the simulator from other wheel covers featuring different opening patterns.
Hand-hole count should be included in website specifications and product filters to help customers identify the correct simulator.
Pop-Out Cap Design
The pop-out caps are an important distinguishing feature of this wheel simulator set.
These removable cap components provide a different configuration from wheel simulators featuring fixed or permanently integrated caps.
The supplied designation does not establish the cap dimensions, attachment details, or specific service-access functions.
Spike-Style Lug Nut Covers
The spike-style lug nut covers provide one of this simulator set's most distinctive visual features.
Their pointed design creates a bold, customized truck appearance compared with traditional rounded or flat lug nut covers.
Combined with the chrome finish, these decorative accents can complement other exterior chrome accessories and commercial truck styling upgrades.
The supplied designation does not establish the spike dimensions, material, attachment method, or number of covers included.
Commercial Fleet & Work Truck Styling
Rear wheel simulators provide a practical way to refresh the appearance of existing commercial vehicle wheels without replacing the original assemblies.
A coordinated wheel appearance can complement vehicle branding, fleet maintenance, and commercial transportation applications.
Installation Recommendations
Before installation, verify the Ram vehicle model and year, rear wheel diameter, wheel width, ten-lug configuration, 225mm bolt circle, five-hand-hole design, wheel profile, hub clearance, valve-stem access, and mounting requirements.
Confirm whether the vehicle uses a single- or dual-rear-wheel configuration and whether the simulator is approved for that arrangement.
Ensure the spike lug nut covers and pop-out caps are installed according to Kaper II's instructions, with appropriate clearance and secure attachment.
Follow applicable commercial wheel safety requirements.
Important: The supplied designation does not establish the specific Ram model, mounting method, cap dimensions, spike cover dimensions, single- or dual-rear-wheel compatibility, or exact package contents. These details should be verified before publication.
