16" × 6" Universal Rear/Tag Wheel Simulator Set – 10-Lug, 360° Retention
Universal Rear Wheel Styling. Ten-Lug Compatibility. 360° Retention.
Give your compatible commercial truck or specialty vehicle a clean, professional appearance with Kaper II's 16" × 6" Universal Rear/Tag Wheel Simulator Set.
Designed for qualifying rear and tag wheel applications, this simulator set features a 10-lug configuration, 7.25-inch bolt circle, and 360° retention system.
The 16-inch wheel diameter and 6-inch wheel width provide important dimensional specifications for identifying compatible wheel assemblies.
Its ten-lug configuration distinguishes this model from eight-lug universal wheel simulators, while the 360° retention designation identifies an important installation characteristic.
The rear/tag application makes this model an option for consideration on compatible commercial vehicles, work trucks, and specialty vehicle wheel assemblies.
Whether refreshing an older commercial vehicle, maintaining a fleet, or upgrading a compatible specialty chassis, Kaper II wheel simulators offer a practical way to improve the appearance of existing wheels without replacing the original wheel assemblies.
Key Features & Benefits
16" Wheel Diameter: Designed for compatible 16-inch wheel assemblies.
6" Wheel Width: Matches the specified wheel width configuration.
Universal Application: Intended for qualifying wheels that meet the required fitment specifications.
10-Lug Configuration: Identifies the specified ten-lug wheel pattern.
7.25" Bolt Circle: Provides a critical wheel fitment measurement.
360° Retention: Features a circumferential retention configuration.
Rear/Tag Application: Specifically designated for rear and tag wheel positions.
Existing Wheel Upgrade: Enhances wheel appearance without replacing the original wheels.
Commercial Vehicle Styling: Complements qualifying work trucks, fleet vehicles, and specialty applications.
Professional Appearance: Provides a coordinated look for compatible wheel assemblies.
Product Specifications
| Specification | Details |
|---|
| Product Type | Rear/Tag Wheel Simulator Set |
| Manufacturer Brand | Kaper II |
| Wheel Diameter | 16" |
| Wheel Width | 6" |
| Application | Universal |
| Wheel Position | Rear / Tag |
| Lug Configuration | 10-Lug |
| Bolt Circle Diameter | 7.25" |
| Metric Bolt Circle Equivalent | 184.15mm |
| Bolt Pattern | 10 × 7.25" |
| Retention Configuration | 360° Retention |
| Hand-Hole Configuration | Not specified |
| Wheel Stud Thread Size | Not specified |
| Lug Nut Hex Size | Not specified |
| Material | Not specified |
| Finish | Not specified |
| Center Cap Configuration | Not specified |
| Exact Retention Hardware | Not specified |
| Single / Dual Rear Wheel Compatibility | Not confirmed |
| Exact Vehicle Makes / Models | Not confirmed |
| Exact Package Contents | Not confirmed |
Vehicle Applications
Universal Rear Wheel Applications
Designed for consideration on compatible 16" × 6" rear wheel assemblies featuring a ten-lug configuration and 7.25-inch bolt circle.
Tag Wheel Applications
Identified for qualifying tag wheel positions where the wheel dimensions, bolt pattern, and retention requirements match.
Commercial Work Trucks
May be suitable for qualifying commercial vehicles equipped with matching rear wheel assemblies.
Specialty Commercial Vehicles
May be suitable for compatible utility trucks, service vehicles, and specialty commercial chassis.
RV and Motorhome Applications
May be suitable for qualifying motorhome or RV chassis equipped with compatible rear or tag wheel assemblies. Vehicle-specific fitment must be confirmed.
The universal designation does not establish compatibility with every vehicle or wheel using a ten-lug configuration.
16" × 6" Wheel Compatibility
The 16-inch wheel diameter and 6-inch wheel width are essential fitment specifications.
Commercial wheel assemblies can vary in offset, profile, center opening, and mounting requirements even when they share the same nominal dimensions.
Customers should verify both measurements before selecting a wheel simulator.
Ten-Lug, 7.25-Inch Bolt Circle
This wheel simulator set is identified for ten-lug wheel assemblies featuring a 7.25-inch bolt circle.
The bolt circle is the diameter of the circle passing through the centers of the wheel's ten mounting positions.
A 7.25-inch bolt circle is equivalent to 184.15 millimeters.
This configuration may be expressed as 10 × 7.25".
Customers should verify the original wheel's bolt pattern before ordering, as not all ten-lug wheels use the same bolt-circle diameter.
360° Retention System
This model is identified with a 360° retention configuration.
The designation indicates a circumferential retention design, distinguishing this simulator from products identified with other mounting arrangements.
The exact retention components and engagement method have not been supplied.
Customers should verify that their original wheel profile is compatible with the retention system and follow the manufacturer's installation instructions.
Rear and Tag Wheel Application
This simulator set is specifically identified for rear/tag wheel applications.
Rear and tag wheel positions may have different hub clearances, wheel profiles, and mounting requirements compared with front wheel assemblies.
The term "Rear Tag" should be retained in the product specifications to help customers identify the intended application.
The supplied description does not establish whether the product fits single-rear-wheel, dual-rear-wheel, or every tag-axle configuration.
Universal Wheel Application
This product carries a universal application designation.
Universal fitment is based on matching the required wheel specifications rather than assuming compatibility with every vehicle manufacturer or model.
Customers should confirm wheel diameter, width, lug count, bolt circle, wheel profile, axle position, and retention requirements before ordering.
Commercial Fleet & Specialty Vehicle Styling
Wheel simulators provide a practical way to refresh the appearance of existing commercial-duty wheels without replacing the original assemblies.
A coordinated wheel appearance can complement vehicle maintenance, fleet branding, and specialty vehicle applications.
Installation Recommendations
Before installation, verify the 16-inch wheel diameter, 6-inch wheel width, ten-lug configuration, 7.25-inch bolt circle, rear/tag wheel position, wheel profile, hub clearance, valve-stem access, and 360° retention compatibility.
Confirm the exact vehicle model and wheel assembly specifications.
Use only mounting and retention components approved for the specific simulator.
Follow Kaper II's installation instructions and applicable wheel safety requirements.
Do not modify safety-critical wheel components to accommodate the simulator.
Important: The supplied designation does not establish material, finish, hand-hole count, center cap configuration, detailed retention hardware, exact vehicle makes or models, single/dual rear wheel compatibility, or package contents. These details should be verified before publication.
